Lumina Nano Ceramic Coating (10H)
Give your vehicle that “just detailed” look—every day. Lumina Nano Ceramic Coating uses advanced nano-ceramic technology to create a tough, glossy protective layer over your paint, helping resist light scratches, chemical stains, UV fading, and everyday contamination. The result is a deeper shine, easier washing, and stronger long-term protection.
Why it’s worth it
-
Nano-ceramic protection layer bonds to the clear coat for durable coverage
-
Up to 10H hardness (with proper prep, correct application, and curing)
-
High-gloss finish that enhances color depth and clarity
-
Hydrophobic effect: water beads and slides off, reducing water spots
-
UV + chemical resistance helps protect against oxidation, road grime, and detergents
-
Easier maintenance: less dirt sticks, quicker washes, better results
Best for
-
Daily drivers, show cars, and new paint protection
-
Anyone who wants maximum shine + easier cleaning without waxing constantly
What it helps protect against
Road film, bird droppings, light swirl marks, dust, water spotting, and mild chemical exposure (when maintained properly).
How to apply (quick guide)
-
Wash + decontaminate (iron remover/clay if needed).
-
Polish (recommended) to remove swirls and maximize gloss.
-
Panel wipe with IPA/prep solution to remove oils.
-
Apply coating to an applicator, spread evenly in small sections.
-
Wait for light “flash,” then buff off with a clean microfiber.
-
Let it cure (avoid water for 24 hours; full cure typically 5–7 days depending on conditions).
Pro tips
-
Apply indoors or shaded area. Ideal temp is usually 15–25°C with moderate humidity.
-
Use two towels: one to level, one to final buff.
-
Don’t apply too thick—thin and even wins.
Notes / disclaimer
“10H” refers to the coating’s hardness rating under ideal conditions. Real-world durability depends heavily on surface preparation, application technique, curing time, and maintenance.
Reviews
There are no reviews yet.